Bar Equipment
Keg Cooler faucets come single, double, or triple. Beer column placement & brand can be modified to suit.
As with all Continental Refrigerator equipment, ask how we can customize a piece to meet your specific, unique needs.
Cabinet Construction
Standard Models: Wear Resistant, Textured Baked Black Enamel Finish Exterior
SS Models: Stainless Steel Exterior
Stainless Steel Countertop, Interior Back, Side Panels* and Reinforced Stainless Steel Floor
Standard Depth or Shallow Depth
Keg Coolers are front-breathing (except 24” models).
Condensing unit available on left or right (left side is standard).
STANDARD FEATURES
- Low Profile Cabinet Design (except 24″ models)
- Performance-Rated Refrigeration System
- Front Breathing (except 24″ models)
- Natural, Environmentally-Safe, High-Efficiency R-290 Refrigerant
- High Density, Non-CFC Polyurethane Foamed-in-Place Insulation
- Stainless Steel Reinforced Threshold
- Extra Large, Balanced Evaporator Coil
- Continuously Cooled, 3″ Diameter Beer Columns with Lever Faucet,
- CO2 Pressure Relief Distributor and CO2 Tubing with Clamps
- Easily Removable Stainless Steel Drip Grate with Convenient
- Front-Mounted Cleanout Drainage Hose (pan not removable)
- Easily Accessible and Serviceable Slide-Out Condensing Unit (except 24″ models)
- Electronic Temperature Control
- Readily Removable Front, Rear and Side Venting Louvered Grills (except 24″ models)
- Automatic, Hot Gas Condensate Evaporator (except 24″ models)
- Automatic, Energy-Saving, Non-Electric Condensate Evaporator (24″ models)
- Cylinder-Keyed Security Lock (each door)
- Magnetic Snap-In Gasket (each door)
- LED Interior Lighting (except 24″ models and shallow depth)
- 5″ High Casters (24″ models only, can not be changed, footing installed)
OPTIONS
- Epoxy-coated shelves with clips
- Stainless steel shelves with clips
- Remote temperature logger
- Wine racks
- Food storage-rated stainless steel interior (NSF-7)
- Single, dual & triple angle faucets
- Faucet lock
- Casters or legs (casters cannot be changed on 24″ models)
- Condensing unit on the right (except 24″ models)
- Tower placement (consult factory)
- Riser base (field installed, 50″ – 90″ models)
SPEC SHEETS
Keg Coolers | KC50SN | KC50SNSS | |
KC24N | KC24NSS | KC50N | KC50NSS |
KC59N | KC59NSS | KC59SN | KC59SNSS |
KC69N | KC69NSS | KC69SN | KC69SNSS |
KC79N | KC79NSS | KC79SN | KC79SNSS |
KC90N | KC90NSS | KC90SN | KC90SNSS |
Brochure
Operation Manual